| Function |
The EBA induction units are suitable for application in 2, 3 or 4 pipe
systems with capacity control on the water or secondary air side. |
Features and Benefits |
Low primary air pressure and extremely low noise levels as a result of:
• Efficient nozzle configuration
• Specially constructed primary air chamber with insulated guide
plate (no other insulation is required in the primary air chamber)
• Aerodynamically designed primary air connection |
Wide Range of Flexibility |
• Different types, varying in lengths from 24” to 53”
• 2 basic models per type, i.e. slim, vertical model or low, deep model
• 6 different nozzle plates per type, induction ratios varying
from 5.50 to 2.50
• Possibility of series connection on the primary air side
• Special kit for horizontal models available
• Suitable for any application in 2, 3 or 4 pipe systems
• Possibility of capacity control on the water or secondary air side
• Various options, i.e. filters, grille and drain connection. |
Units Completely Ready for Operation, Including: |
• Primary air damper
• Ventcock
• Suspension lips |
Attractive dimensions |
• Minimum depth of 6.3” (slim model)
• Minimum height of 11.5” (low model) |
Robust Construction |
| Suitable for VAV applications. |
Component Description |
| Primary air chamber: |
• Insulated guide plate
• Primary air adjustment damper
• Aerodynamically shaped primary air connection (4” dia.) |
Nozzle plate |
• Specially designed polyethylene nozzles
• Nozzle temperature resistance 1580F
• Bronze nozzles available with some models |
Coil |
• Copper tubes with aluminum fins
• Water connection 1/2” O/D complete with vent cock
• Suitable for water pressures up to 350 psi
• Drip tray included |
Air mixing chamber |
• Robust construction
• Suspension lips |
Secondary air dampers (For MK & MKM models) |
• Rotating in nylon bearings
• Air tightness obtained by neoprene edge strip
• Robust construction actuating mechanism |
Pneumatic motor (For MK & MKM models) |
• With neoprene diaphragm
• Operating pressure from 3 to 15psi
(0.2 to 1.0 kg/cm2) for MK and 8 to 15 psi
(0.6 to 1.0 kg/cm2) for MKM |
Sheet metal |
• All sheet metal components electrolitically zinc plated
with a layer thickness 1 mil |
Scott filter |
| • Cleanable, polyurethane material, 1/4” thickness |
Lintscreen filter |
| • Cleanable woven aluminum |
Grilles |
| • Nylon, with curved fins, adjustable in 4 directions |
| |
